PRODUCT

0-2000°C RESEARCH MATERIAL & HEATING TREATMENT'S LEADER

Ask for a free consultation Ask for technical support

Home > Products > Tube Furnace > PECVD Furnace

Product

Muffle Furnace
- Box Furnace
- Bell Furnace
- Crucible Furnace
- Trolley Furnace
- Atmosphere Furnace
Tube Furnace
Vacuum Furnace
- Fiber Vacuum Furnace
- Heat Shield Vacuum Furnace
- Graphite Vacuum Furnace
- Vacuum Hot Pressing Furnace
- Vacuum Carbon Tube Furnace
Accessory For Heating Furnaces

Contact Us

Email

info@lab-furnace.com
Tel

+8617719806024
WhatsApp/WeChat

+8617719806024

Leave Message

All products are customizable, leave message immediately, we will reply as soon as possible.

model:PT-1200C-R-S-PECVD

Small rotary type PECVD Furnace

Application

Detailed Parameters Of The Product

Main features
　　The tube of the equipment can be rotated 360 degrees, and the quartz baffle on the inner wall of the tube helps the powder to be turned over to help the sintering to be more uniform;
　　
　　It can be tilted from left to right at a large angle to facilitate the discharge. The tilt angle is between 0~35°.
　　
　　The device is a fully automated Plasma Enhanced CVD System (PECVD),can achieve continuous sliding temperature zones and to continuously control the temperature and plasma intensity.Equipped with vacuum unit,can realize experiments under low pressure conditions, such as low temperature graphene and carbon nanotube growth. PECVD system enables the entire experimental cavity to be in the glow generation area, and the glow is evenly equivalent. This technique solves the unstable state of the traditional plasma operation, so the range and intensity of ionization. It is a hundred times more than traditional PECVD and solves the problem of uneven material accumulation.
　
　　Used for prepare metal composite graphene material,is the most high-end preparation equipment for metal composite material
　　
Technical Parameters

Furnace
Max. Temp	1100℃
Temperature Controller	PID automatic control and auto-tune function. 30 programmable segments for precise thermal processing. Built-in protection for the over-heated and broken thermocouple. 10" LCD touch screen and industrial instrumentation dual temperature control
Heating Elements	·Resistance wire, Fe-Cr-Al Alloy doped by Mo
Temperature Accuracy	+/- 1℃
Processing tube	·Size：Φ25800（middle sizeΦ50225） Furnace tube rotation rate：3~13r/min
Furnace body inclination angle	0~35°（adjustable）
PE source
Signal frequency	13.56 MHz±0.005%
Power output range	0-150W
RF output interface	50 Ω, N-type, female
Power stability	≤5W
Gas supply system
High precision mass Flowmeter（Range optional）	high precise MFC(optional)
Accuracy	±1.5%
Response accuracy	·±0.2%
Response time	Gas characteristics：1～4sec Electrical characteristics:10sec
Working pressure difference range	0.1～0.5MPa
Max. pressure	·3MPa
Connection	Φ6mmDouble clasp stainless steel joint
Vacuum unit
KF25 series bellows and manual stopper valves
Vacuum up to10-1Pa
The value can be displayed intuitively by the digital display vacuum tester

Pre:Roll to roll pecvd system for constant graphene film production
Next:Plasma enhanced rotational PECVD system

Customer Case

After-sales serveces

Please leave your requirements

We provide 24/7 hours global online service, one-stop customized service, welcome to consult.

Contact

No. 104, building 31, Xingyang equipment manufacturing industrial park, Zhengzhou City,
Henan Province, China
Zhengzhou Protech Technology Co., Ltd
郑州诺泰科技有限公司

sitemap Privacy Policy

Products

Leave A Message