0-2000°C RESEARCH MATERIAL & HEATING TREATMENT'S LEADER
Ask for a free consultation Ask for technical support
This customized high temperature atmosphere furnace is mainly used in college laboratories, industrial and mining enterprise laboratories, for chemical analysis, physical determination, sintering and dissolution of metals, ceramics, etc., used in electronic components, powder metallurgy, magnetic materials, quartz materials, etc Debinding, pre-sintering and firing can also be used for heat treatment processes of other materials. The furnace body adopts a double-layer furnace shell structure, high-performance heat insulation material, and is equipped with a cooling fan, which makes the surface temperature of the furnace body lower and saves 60% energy compared with ordinary furnaces. The furnace door and furnace roof are sealed with high-temperature silicone rubber, which can be pre-evacuated and can be introduced into a variety of inert gases.
Technical Parameter:
|
Product number |
PT-A1700-8L-DZ |
|
Furnace structure |
Double-layer shell structure, equipped with a cold air system to automatically cool the furnace shell |
|
Furnace material |
High-quality and high-purity alumina polycrystalline fiber curing furnace, with good insulation performance, high reflectivity and balanced temperature field |
|
Maximum temperature |
1700°C |
|
Operating temperature |
≤1600℃ |
|
Heating rate |
Recommended ≤10℃/min |
|
size |
200*200*200mm, width * height * depth) |
|
Temperature Control System |
It has PID adjustment and self-tuning functions and can compile 30 steps of temperature rise and fall programs; |
|
Heating element |
High temperature silicon molybdenum rod |
|
Temperature measuring element |
Type B thermocouple |
|
interface |
The furnace is equipped with inlet, outlet and vacuum ports, and there are float flow meters and mechanical vacuum pressure gauges on the gas path |
|
Sealing system |
The furnace door and roof are sealed with high temperature silicon rubber. The furnace has air inlets and outlets for gas and vacuum |
|
Gas line |
One nitrogen float flow meter, one hydrogen float flow meter |
|
Power supply |
AC220V, 50/60Hz |
|
rated power |
8KW |
|
Door opening method |
Side door |
|
Vacuum pump |
VRD-8 rotary vane pump pumping speed 2.2L/S |
|
Ultimate vacuum |
-0.1MPa |
|
Exhaust gas treatment device |
The hydrogen combustion device can automatically ignite the eliminated hydrogen |
|
The standard configuration |
1 crucible tongs, 1 pair of high temperature gloves, 1 manual, 1 certificate of warranty card |
|
Remarks |
Please pay special attention: H2 is a particularly flammable and explosive gas. Its combustion temperature is 400℃. It will explode when the mixing ratio with air reaches 4.0%-74.2%, so safety measures must be taken when using hydrogen. The maximum pressure that can withstand in the furnace is 0.03MPa, so a pressure reducing valve must be installed on the gas cylinder when gas is introduced into the furnace. Before introducing hydrogen, inert gas must be used to clean the furnace. The pressure inside the furnace should always be kept between 0.01-0.02 Mpa during use to prevent air from flowing back into the furnace and causing an explosion. The room where the equipment is placed must be well ventilated. The discharged hydrogen must be combusted indoors (the top of the furnace body is equipped with an automatic ignition device) In order to keep the pressure in the furnace chamber relatively stable during the heating process, we recommend that the equipment increase Temperature rate is less than 10℃/min |
Heat treatment equipment
Vacuum Furnace
Tube Furnace
Box Furnace
Customize Furnace
Accessory For Heating Treatment Equipment
Solution for Ultra Hard Tools
Equipment for Ultra Hard Tools
PCD and PCBN for Ultra Hard Tools
No. 104, building 31, Xingyang equipment manufacturing industrial park, Zhengzhou City, Henan Province, China
sitemapLeave A Message
English
简体中文
Français
日本語
한국어
Português
Русский
Español
