PRODUCT

0-2000°C RESEARCH MATERIAL & HEATING TREATMENT'S LEADER

Ask for a free consultation Ask for technical support

Home > Products > Heat treatment equipment > Box Furnace > Standard Furnace

model:PT-1200M

laboratory Ashing furnace

Application

Contact us for customize send-email: info@lab-furnace.com

Detailed Parameters Of The Product

Description：
laboratory Ashing furnace is widely used in denture processing industry, science research institutes, zirconia sintering,ect.

1.Features of laboratory Ashing furnace :

(1). Operation Temperature: 1100℃ ( 1200℃ for short time).
(2). Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.
(3). Three sides resistance wire coil for fast and uniform heating.
(4). Heavy duty double layer structure with cooling fan. Lower temperature in outside case.
(5). 0.5" diameter observation window made of quartz glsss, allows users to see inside chamber during heating operation.
(6). PID automatic control via current limiting phase angle fired the resistor, e.g. SCR(Silicon Controlled Rectifier).
(7). Power control with 30 segments programmable.
(8). Vent port (gas outlet) installed on the top for gas flow.

We have a wide range of different optional function furnace to meet different heating requirement, also we accept customer design furnace R&D working, please email us your specific requirement, we will recommend most reasonable choice for you, thanks!

2.Technical parameters of Ashing furnace:

Model	PT-1200M Ashing furnace
Chamber model	Side Door
Display	LED
Limiting temperature	1200℃
Working temperature	≤1150℃
Heating rate	Suggestion 0~10℃/min
Temperature accuracy	±1℃
Inside chamber size	150×150×200(mm）
Heating element	electric wire
Thermal couple	K Type
Temperature control	PID automatic control via SCR power control
Heating curves	30 steps programmable
Chamber material	Alumina Fiber
Rated power	4KW
Working voltage	AC 110-480V 50-60Hz
Warranty	12 month (exclusive wearing part)