0-2000°C RESEARCH MATERIAL & HEATING TREATMENT'S LEADER
Ask for a free consultation Ask for technical support
Tel
WhatsApp/WeChat
Contact Us
All products are customizable, leave message immediately, we will reply as soon as possible.
| Model | PT-T1400-4CVD | |||
| Part I: Single Zone Sliding Type Tube Furnace | ||||
| Tube Furnace (The furmace will be sliding type) |
Display | LED Customizable | ||
| Furnace Structure | Split type and upper part can be opened. Double layer steel casing with air cooling to keep furnace surface temperature lower than 60°C. High purity fibrous alumina insulation for Max. energy saving. |
|||
| Max. Temperature | 1400℃ | |||
| Continuous Working Temp. | ≤1300℃ | |||
| Heating Rate | Suggestion: 0~10℃/min (max. 20℃/min) | |||
| Temperature Zone | 300mm single zone Customizable | |||
| Heating Element | SiC rods | |||
| Thermocouple | N type | |||
| Temperature Control Accuracy | ±1℃ | |||
| Processing Tube | 60 x 1200mm (OD x L) Customizable | |||
| Material: High pure Quartz | ||||
| Two fibrous ceramic blocks are included for blocking heat radiation from inside tube (Ceramic blocks must be fully inserted into the furnace chamber before heating). | ||||
| Temperature Controller | -PID automatic control via SCR (Silicon Controlled Rectifier) power control -30 programmable segments for precise control of heating rate, cooling rate and dwell time. -Built-in over temperature alarm and protection allows for operation without an attendant. - +/- 1 ºC temperature control accuracy. |
|||
| Part II:Water Cooling System | ||||
| Water cooled flange + water chiller (Below photo is only for reference, please only reference water cooling part) |
Water cooled Vacuum Flange | Water Cooled Sealing flange with valve and Mechanical vacuum gauge. Made of Stainless Steel with double high temperature silicon O-rings on the flange. Stainless steel needle valve with 1/4" pipe adapter. Mechanical vacuum gauge is installed in one side of flange. Water Cool System is an ideal tool for supplying cooling water to this flange set |
||
| Water Chiller | Max. Flow rate 10L/min | |||
| Part III: 4 Channels Mass Flow Meter and Controllers | ||||
| Mass Flow Meter (touch screen for option need extra cost) |
Four precision mass flow meters : MFC 1: Gas flow range from 0~500 sccm Ar MFC 2: Gas flow range from 0~5 sccm 02 MFC 3: Gas flow range from 0~20 sccm CH4 MFC 4: Gas flow range from 0~100 sccm H2 One gas mixing tank is installed on bottom case with liquid release valve 4 stainless steel needle valves is installed on left side of bottom case to control 4 type gases mixing manually. |
|||
  |
|
| Forepump model | WXG-4B |
| Displacement Speed | 4L/S |
| Ultimate pressure(Pa) | ≤1.5 |
| Scroll pump leakage rate | 1×10-6 Pa.m3/S，special gas can be 1×10-8Pa.m3/S |
| Water vapor handling capacity | 25g/day |
| Rotational Speed of pump(50HZ) | 1450rpm |
| Inlet flange | KF25 |
| Outlet flange | KF25 |
| Turbomolecular model | FJ-110 |
| Turbo pump speed | 110L/S |
| Inlet flange | DN100CF |
| Compression Ratio | N2:＞108, H2:5x102 |
| Ultimate vacuum (Pa) | 6x10-7Pa |
| Suggest run vacuum(Pa) | ＜100 |
| Cooling method | Air /water |
| Weight(kg) | 52 |
 |
|
No. 104, building 31, Xingyang equipment manufacturing industrial park, Zhengzhou City,
Henan Province, China
Zhengzhou Protech Technology Co., Ltd
郑州诺泰科技有限公司
Leave A Message
English
简体中文
Français
日本語
بالعربية
한국어
Português
Русский
Español
