PT-TX1000-L150CK3W inclined rotary tube furnace

Application: The PT-TX1000-L150CK3W inclined rotary tube furnace is used for laboratory calcination and drying of positive electrode materials, non strong acid-base powder materials, and granular materials in batteries. Users can choose to calcine under vacuum or atmosphere protection according to the materials they want to calcine.

send-email:

info@lab-furnace.com

Heat treatment equipment
Coating Equipment
- CVD System
- PECVD System
- Roll-to-roll graphene film growth equipment
- Plasma Magnetron Sputtering
- Evaporation Coating
Dental Furnace
Solution for Ultra Hard Tools
- Equipment for Ultra Hard Tools
- PCD and PCBN for Ultra Hard Tools
Other Lab Equipment
- Pressing Machine
- Sample Preparation
- Battery Equipment
- Plasma Cleaner
- Induction Furnace
- Dry Oven
- Microwave Equipment
- Reactor
- Glove Box

Model	PT-TX1000-L150CK3W
Furnace structure	Carbon steel outside shell Alumina fiber lining Double-layer structure with cooling fan Split type
Continuous working Temperature	≤1000℃
Heating Rate	0-20℃/min, Suggestion 0~10℃/min
Temperature Zone	Three heating zone
Heating zone length	400+400+400mm, total length 1200mm
Tube size	OD150mm x L2400mm
Heating Element	SiC rods
Temperature Control Accuracy	±1℃
Tube rotating Speed	0 - 5RPM variable
Furnace Tilt Angle	0~5°
Thermocouple	3 pieces of K type
Max.heating Power	26KW(Specific according to design)
Tube material	Inconel 601(with lifting blade inside)
Chamber material	Alumina Fiber
Left side	-8L of SS304 stainless steel of container; -Auger drive for material feeding (SS316 stainless steel); -N2 Gas inlet; -SS304 stainless steel cover for relative sealing.
Right side	-4L of SS304 stainless steel of container, both top and bottom with valves; -OD35xL600mm Inconel 60l tube on the right side for exhaust gas out(with diameter 50mm flange connection port). -SS304 stainless steel cover for relative sealing. -N2 Gas inlet;
Working Voltage	AC 480v, three-phase, 60 Hz
Temperature Controller	3 pieces of Eurotherm 3504 temperature Controllers
Mass flow meter	MFC 1: 0-2000sccm, N2 MFC 2: 0-20000sccm, N2 Installed with 2 stainless steel needle valves. Accuracy： ±1.5 % F.S Linear：±(0.5~1.5) % F.S Repeatability：±0.2 %F.S Response time ： Electrical Characteristics: 10 sec Gas Characteristics: (1 ~ 4) sec Working pressure range：(0.1 ~ 0.5) MPa Operating ambient temperature：5 ℃ ~ 45 ℃ Input and output signals：0 V ~ +5.00 V (Input impedance is > 100K, output current < 3mA)
Warranty	One year limited warranty

PRODUCT

PT-TX1000-L150CK3W inclined rotary tube furnace

Product

Recent customes products

After-sales serveces

Contact

Products

Application