PRODUCT

0-2000°C RESEARCH MATERIAL & HEATING TREATMENT'S LEADER

Ask for a free consultation Ask for technical support

Home > Products > Heat treatment equipment > Tube Furnace > Inclined rotary tube furnace

model:PT-T1000

Three temperature zone rotary tube furnace

Application

Contact us for customize send-email: info@lab-furnace.com

Detailed Parameters Of The Product

Introduction:
Three temperature controllers of three temperature zone tiltable rotary tubular furnace can independently control the temperature, and can set up 30 temperature rise and fall programs. Temperature zone 1 (the center of heating zone) is heated by silicon molybdenum rod, and the other two temperature zones are heated by silicon carbon rod. This tubular furnace can form a temperature gradient, adjust the temperature of three temperature zones, and prepare functional materials under the thermal gradient, which is also suitable for CVD method Thin film epitaxial growth was made

Scope of application:
It is mainly used for experiments and small batch production in Colleges and universities, scientific research institutes, industrial and mining enterprises, etc. It is used in the process of pre sintering, sintering, coating, high temperature pyrolysis and low temperature deposition (CVD) of electronic ceramic products.

Technical Parameter:

Chamber structure	Split door
Function	Tilt and rotate: 0-15rpm Tilt：max15degree
Vacuum pump set	10pa
Digital Display Vacuum Gauge	Yin Fukang
Mass flow meter three channel	Ar 0-8Slm，C2H2 0-2 slm，C2H2 0-2 slm
Temperature Display	LED or LCD
Max. Temp.	1000°C
Heating Rate	0~50°C/min (Max. 50°C/min )
Temp. Control Accuracy	±1°C
Tube Size	stainless steel tube :Total tube size 1.2m Inner diameter: 200mm Heating zone:600mm Lifters: four, total length500mm
Max. Power	20KW
Working Voltage	AC 460V three phase, 60Hz
Temperature Control	PID automatic control via SCR power control
Heating curves	16 steps programmable
Chamber material	Alumina Fiber