Detailed Parameters Of The Product
Introduction:
PT-1200X-BF-15 is a 15'' wide conveyor belt furnace with the concept of continuouing process of various materials . It is a perfect pilot scale manufacturing tool for thick film, electronic component firing process, photovoltaic cells pre/post-fabrications and sintering of ceramics & metals materials. Working pieces are carried directly on a mesh type belt and been heat treated/process through the heating modules under protective gas atmosphere.
Technical Parameter:
Main Features
|
· The higest quality heating wire and thermal couple
· Automatic feed loading and product unloading
· Large touch screen temperature controller provides individual temperature programming for the seven heating zones
· Dual thermocouple temperature mornitoring & control mechanism
· Easy to install by three moduls
|
Furnace structure
|
· Total seven heating modules.
· High purity fibrous alumina insulating systems between each modules for the max energy saving
· Dual layer insulation design ensure the a casing surface temperature < 70C
· 300mm Long cooling section is integrated at the end section of the furnace
· Mesh type belt is supported in the furnace by a series of quartz supports.
|
Power
|
· AC 208-240V Three Phase, 50/60 Hz,
· Current: ~50A for each phase.
· 24 KW Max. (~3KW for each zone)
· Powder cord is included without plug.
|
Temperature Control
|
· 32 Segments Programmable PID Touch Screen Controller allows individual temperature control for the seven zones
· Max. Working Temperature: 1100°C ( short time )
· Continuous Working Temperature : 1050°C Max.
· K Type Thermocouple
· Temp. Control Accuracy: +/-1℃
|
Heating Zone
|
· Seven independent heating zones, each heating zone length 300 mm ( 11.8")
· Total zone length: 2100 mm ( 82.7'' )
· Heating Zone width: 8" ( 200 mm )
|
Max. Sample Size allowed
|
6'' W x 1'' H
|
Conveyor Belt and Main Entrance
|
· Mesh type conveyor belt, 130mm Wide X10mm Thick X 6200mm Long
· 6'' Wide Entrance (Can be increased to 12'' Wide upon request)
|
Control Pannel
|
· All parameters are controlled via touch screen control panel
|
Optional
|
· Nitrogen gas curtian is available upon request at extra cost
|
Furnace Dimension
|
Furnace: 3200mm L X 700mm W X 1500mm H
Power Supply: 1000mm L X 600mm W X 800mm H
|
Warranty
|
One year limited warranty for electrical parts. (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.)
|
Compliance
|
· CE Certified
· UL / MET / CSA Certification is available upon request, additional charges will apply
· Temperature controller is MET and CE Certified
  
|
Manual & Video
|
Coming soon...
|
Application Notes
|
· Metal and ceramic sintering
· Thick film firing process
· Fast drying and curing
· Calcination
· Carbonization
· Gas-solid reaction
· Purification
· Metalization process of solar cell fabrication
· Customizations Available:
o Heating hearth are modulized, 300mm ~2100mm L is available upon request.
o Heating zone width can be increased upto 12''
|
