Large atmosphere furnace with rotating touch screen

Application: Mainly used in battery industry, metal material industry, heat treatment industry, powder metallurgy industry, semiconductor material research, IC manufacturing and other fields for sintering under high temperature in various atmospheres.

send-email:

info@lab-furnace.com

Heat treatment equipment
Coating Equipment
- CVD System
- PECVD System
- Roll-to-roll graphene film growth equipment
- Plasma Magnetron Sputtering
- Evaporation Coating
Dental Furnace
Solution for Ultra Hard Tools
- Equipment for Ultra Hard Tools
- PCD and PCBN for Ultra Hard Tools
Other Lab Equipment
- Pressing Machine
- Sample Preparation
- Battery Equipment
- Plasma Cleaner
- Induction Furnace
- Dry Oven
- Microwave Equipment
- Reactor
- Glove Box

Product name	Box atmosphere furnace
Model	PT-A1400-80LWQ
Structure	Double-layer air-cooled structure, built-in cooling fan, to ensure that the surface of the shell is not hot
Surface treatment	Made of high-strength carbon steel, after pickling and phosphating to remove rust, electrostatic spraying, beautiful and generous
Chambe size	400400deep500mm
Operating temperature	Under continuous work, the temperature is not more than 1300℃; the highest temperature: 1400℃
Furnace material	Fiber lining + refractory bricks constitute the entire furnace ● The first layer: polycrystalline alumina ceramic fiber, which not only ensures sufficient strength of the furnace, but also ensures an excellent heat insulation effect. Refractory bricks for furnace mouth and bottom ● The second layer: 1260 aluminum silicate fiberboard
Temperature control method	Rocker arm touch screen, intelligent programmable microcomputer to control multi-segment programming curve and can store 16 sintering processes. According to the preset program, it can automatically heat up, keep warm, and cool down with one key. No workers are required. The sintering data can be recorded in real time and copied to the computer. superior Phase shift trigger, SCR control, the meter has PID self-tuning function.
Furnace temperature uniformity	About plus or minus 8 degrees, strive to achieve a 300300400 area plus or minus 5 degrees
Heating rate	0-10℃/minAdjustable
Alarm	With over-temperature alarm, thermocouple break alarm, and automatically cut off the power supply to provide reliable protection.
Heating element	High-quality silicon carbide rods are arranged vertically on the side for easy replacement
Number of temperature zones	2 temperature zones, independent temperature control
Thermocouple	S-type platinum rhodium thermocouple for temperature measurement, the thermocouple protection tube is a corundum tube with a purity of 99.7%
Door opening method	Sideways
Inlet/outlet	One air inlet, one air outlet, and one vacuum pump suction port
Accessible atmosphere	Inert atmosphere (slightly positive pressure)
Float flowmeter	Install a float flowmeter with a range of about 1L/MIN
Vacuum	Mechanical pressure vacuum gauge can reach -0.1MPA
Operating Voltage	380V 50HZ
Maximum power approx.	20KW
Delivery	1 door plug, 1 crucible tongs, 1 pair of high temperature gloves, and 1 hex wrench for the shell.
special requirements	1. Two temperature zones to control temperature 2. Install a temperature measuring thermocouple on the back wall, and realize data display and recording 3. High box, electric control placed on the side
Warranty	● 12 months warranty (except for consumable parts such as silicon molybdenum rods, silicon carbide rods and man-made damage), lifetime warranty, and free technical guidance installation and equipment commissioning services. After the warranty expires, renewal services are provided. ● General faults are resolved within 24 hours, and major faults are resolved within 72 hours. In special circumstances, technicians can go to the scene to deal with problems.
usage notice	● The temperature of the electric furnace should be slowly cooled down. ● It is forbidden to heat flammable and explosive substances and pass flammable and explosive gases. ● After the electric furnace is used, small cracks will occur on the surface of the furnace lining. This is a normal phenomenon and does not affect the service life of the electric furnace. ● Before the electric furnace is heated, the fire block of the furnace door must be placed in the furnace frame.

PRODUCT

Large atmosphere furnace with rotating touch screen

Product

Recent customes products

After-sales serveces

Contact

Products

Application